BridgeComSystems BCM-220, Руководство пользователя

Страница: 22 / 32

3. Press the SELECT button to be able to change the OFFSET. A good beep
is emitted.
4.
Rotate the SELECT knob clockwise or counter clockwise to find your
desired offset. Once found, press the SELECT knob. A good beep is
emitted and control goes back to the menu.
5.
To exit the personality menu, press the ‘B’ button on the control head and
the radio will revert back to VFO mode. A good beep is emitted.
• Change the BEEP Tones ON/OFF
The Beep Alert tones can be toggles ON or OFF.
1. Make sure the radio is in VFO mode. Press the ‘B’ button on the control
head to access the personality menu. If Beeps Tones are ON, a good
beep is emitted.
2.
Rotate the SELECT knob until BEEP TONES is displayed on the top line
and ON or OFF is displayed on the bottom line.
3.
Press the SELECT button to be able to change the status.
4. Rotate the SELECT knob CW to turn ON, rotate the SELECT knob CCW to
turn OFF. Press the SELECT knob to exit the selection process. If beeps
are ON, a good beep is emitted and control goes back to the menu. The
note icon will be illuminated on the display when BEEP TONES are ON.
5. To exit the personality menu, press the ‘B’ button on the control head and
the radio will revert back to VFO mode. A good beep is emitted.
• TX Time Out Time (TOT)
In the event the radio is keyed too long, this timer will cause the radio turn off the
RF PA. For example if the Mic is mistakenly left in the seat wedged against
something where the PTT button is pressed. This timer will prevent the radio from
transmitting too long.
1. Make sure the radio is in VFO mode. Press the ‘B’ button on the control
head to access the personality menu. A good beep is emitted.
2.
Rotate the SELECT knob until “TX TIME OUT s” is displayed on the top line
and the current value is displayed on the bottom line. The value is
displayed in seconds.
3. Press the SELECT button to be able to change the time.
22