Page 11
BrickHouse Security User’s Guide
Page 12
BrickHouse Security User’s Guide
Setting Time and Date
Setting the time and date stamp on your device is easy. Simply
create a .txt file on your computer and name it “time”. In that
file you will enter the date and time in the following format: year.
month.day hour:minute:second. (Ex. 2011.01.31 12:00:00)
Once you’ve created the file, connect the device to your
computer via USB and save the .txt file to the device’s root
directory. When you connect the device to your computer, it will
be assigned a drive letter (ex. C:, D:, E:). When you open that
drive, you are in the root directory, or topmost level of the drive.
After you have loaded the file, safely disconnect the device
from your computer, turn the device on and off, and the time
and date you loaded should now appear on any new videos
and photos you record.
After you have loaded the file, safely disconnect the device
from your computer, turn the device on and off, and the time
and date you loaded should now appear on any new videos
and photos you record.
Troubleshooting
Problem: the device seems to have frozen and isn’t reacting
when any buttons are pressed. Solution: This usually occurs
if the device receives too many commands in too short a time.
To reset the device, use a thumbtack or something similar to
press the recessed Reset button located on the bottom of the
device.
