Indicator status and meanings
IMPORTANT REMINDINGS: PLS DON'T PUT SD OUT DURING RECORDING
OR IT COULD POSSIBLY CAUSE DAMAGE TO SD. WHEN THE BATTERY IS
RUNNING OUT, IT WILL SAVE THE LAST FILE AND POWER OFF
Switch to REC
Switch to MD
NO SD
Low battery
SD full(if it is not auto-recycling)
Charging the camera
Full charged
Connect with PC as a U-disk
When connect with PC and
power on the camera to either
REC or MD
The blue flash 3 times and goes off,
it will record continuously by 2
minutes video each
The red and blue flash once, then
the red flash 3 times and goes off
The red or blue will flash for 10
seconds and it powers off
The red and blue will flash for 10
seconds and it powers off
。
Or sometimes battery is totally
running out, it could not power on
at all.
The red and blue will flash for 10
seconds and it powers off
The yellow stays on(Suggested to
put the switcher to OFF when
charging)
The yellow be off
The yellow will stay and the
blue&red will flash
10
Motion detected
The red&blue flash once and red
will flash 3 times and goes off. It
will save to SD for about each 1
minute video
