mount the camera to your desired location in the vehicle. The most common
installation of the secondary camera is inside the main cabin and facing the
driver.
1. After installation of the CP2-LTE and accessories into the vehicle you can
turn on the ignition the CP2-LTE recorder will power on.
2. There will be a sequence of red, blue and green LED lights during the
boot-up process.
3. Once the boot-up is complete, there will be solid blue light. This means
proper operation and recording. Shortly after, the green liht should become
steady, indicating connectivity.
4. After the camera has been booted completely press the G-Sensor
calibration button once (small red button to the left of the panic button).
The vehicle should be parked on a flat surface when pressing the G-Sensor
calibrate button.
5. There will be a beep and the CP2-LTE light will blink briefly to indicate the
G-Sensor calibration has registered.