Date/Time: in the Date/Time section, you can adjust the timestamp on
your videos. Choose “PC Date Time” to program the device using the
time and date saved to your computer. Click the “Custom
Date Time” radio button to manually program the timestamp using
the dropdown boxes. The DVR Date/Time “SnapShot” settings
displays the timestamp programmed into your Tilt when it was
con-nected to your PC. To load any time changes, click on “Sync
Date Time to DVR”. You should see a notification that reads “Date
Time Updated” when complete.
Note that the Date/Time stamp on your videos will not be
accurate until you have adjusted settings with the BHS Cam
Setup Tool. If the device runs out of power it will hold its time
settings for up to 5 days. If more time passes between charges,
the time will have to be reset.
BrickHouse Security User’s Guide
Page 10
