- 4 -
3. Drill three holes through the center of the three location holes on the sticker.
4. Hammer the three plastic anchors which are provided in the product package into the
three location holes.
5. Please use the
“Waterproof Tape” to wrap around the RJ45 connector, DC12V connector, USB
connector (*), in order to prevent water to seep in to the connectors.
6.
The user needs the three screws which are included in the product package and a
screwdriver. Mount the camera on the wall or ceiling and position the three screw slots
over the plastic anchors. Insert the screws into the holes and use the screwdriver to
tighten the screws clockwise until they are secure.
