Remove gear
locking pin
before installing
batteries.
CONTROL BUTTONS ON THE BACK
Temperature Format Button
Reset Button
WiFi Activation Button
WF12LCDA WiFi Clock
Basic Operation
1. Inserting the batteries or pressing the WiFi button on the back of the clock
will enable the WiFi WEB service. The WiFi icon on the LCD display and red
LED on the dial will begin flashing, indicating that the clock is searching for
the network. When the clock is connected to the network, the icon and LED
will remain steady. If the clock does not connect to the network, the icon will
blank.
2. When the WiFi WEB service is turned on, pressing the WiFi button will
turn the WEB service and red LED off.
3. Press “C/F” to switch between degrees C and degrees F.
4. Inserting batteries will cause the WiFi power to remain on for 10 minutes.
5. Pressing the WiFi button will cause the power to remain on for 5 minutes.
6. A flashing LED indicates the clock is searching for the network.
7. A steady LED indicates the clock is connected to the network.
8. When the LED is off, the WEB service is powered off
9. A fast blinking LED indicates factory settings are being restored.
10. The LED will flash every 10 seconds when the batteries are low.
11. The clocks attempts to obtain time updates randomly between the hours
of 19:00 and 22:00 daily.
12. The second hand requires 10 times more battery power than the hour
and minute hands. The second hand can be configure to stop between
designated hours. To stop the second hand completely, enter 0:00-23:59.
13. The temperature display range is: -9.9C to 50.0C
BRG Precision Products
600 N. River Street
Derby, Kansas 67037
Ph. 316-788-2000
www.brgprecision.com
Содержание WF12LCDA
Страница 1: ...WIFI SMART CLOCK User Manual WF12LCDA ...