Fiche technique
ST FRE170
29
ON/OFF:
Press once this button to make the unit ready for working. It will start up with MID in
3 seconds and then revert to work under the memorized status. If for first time use, it will start
up with MID in 3 seconds and then work with LOW.
Press again this button to turn OFF.
NORMAL
: It starts up with fixed speed and under NORMAL mode.
SLEEP
: Lower wind speed than Normal mode, more quiet and softer.
In sleep mode, if no any operation on the touch bottons, the brightness of all indicator lights
and digital tube will be dimmed after 3 minutes.
SPEED
: Press
this
button
to
select
desired
fan
speed, LOW
→
MID
→
HIGH
→
LOW, in turn.
TIMER
: It can be set between 1 to 24 hours, increased by 1-hour intervals. Digital tube displays
the remaining time.
LEFT AND RIGHT SWING
: Pressing once this button can control left and right air swing. Press
again this button to cancel this function.
UP AND DOWN SWING
: Pressing once this button can control up and down air swing. Press
again this button to cancel this function
COOL:
During operation, press this button to start the evaporative
cooling function, the water pump and the UV lamp start working; When press this button again,
the water pump and the UV lamp stop working (first ON, second OFF). And both of water pump
and UV lamp stop working when water shortage.
Fault detection
a. If the sensor has problems, the digital tube displays E1.
PROTOUMAT - 35 route de Colmar, 67600 Sélestat
Tél. : 03 88 08 65 06
SIRET : 444 448 898 00015
Fax : 03 88 08 67 39
29
STAR PROGETTI / PROTOUMAT | ST FRE170 | 11/2022