Brewtools B150pro, Руководство пользователя

Страница: 5 / 22

7712206-User Manual-EN-2019-9 5 | 22
First-time use
This chapter will tell you how to do the necessary steps to
prepare your system for use.
For a full video walkthrough of the assembly and preparation
of the system, check out
www.brewtools.com or scan the QR
code.
Assembly
Unpack all the parts and place the brewing system upside down. Connect the power cables
and other accessories like the return temperature sensor if you have that. The power cables
should exit one of the service holes on the back of the system. The connectors have grooves
that only allows the connector to be installed correctly. Do not use excessive force when
plugging in the connectors. The optional return temperature sensor should go through the
left silicone grommet that is already installed.
Flip the system the right way up and install the 3-way valve on the right side as shown
below. Install the pump temperature sensor in the sensor adapter included with a gasket
between the sensor and the adapter. Install the assembled sensor adapter on the rear
outlet using a TC clamp with a gasket. Cut a part of the included silicone tube and install it
between the sensor adapter and the pump. Make sure the tube has a nice curve to avoid
blockages.
3-way valve on the right side with sensor adapter and pump inlet tube.