Brew
Ratio
BRWC-1053
the Barista Kit
Revision 1.0
Page 3
27 July 2020
[M] Weighing Unit Measurement:
Under weighing status, press the [M] button to change the weighing unit measurement. 9 different
units are available:
G – Gram
CT - Carat
DWT - Denarius Weight
OZT - Troy Ounce
OZ – Ounce
GN - Grain
LB – Pound
TL - Tola
mL - Milliliter
Choose the one that you need to use. The default unit is ‘G’.
[T] Tare:
Press the [T] button to clear the display weight to zero, the LCD screen will show '0.00'.
[PCS] Counting features
Make sure all items are of uniform weight for counting features to work.
Press and hold the [PCS] button until you see the word ‘PCS’ appear on the screen, and a sample
count displayed. Press the [M] button to choose a sample count. Available sample counts are ‘25’,
‘50’, ‘60’, ‘75’ & ‘100’.
Place the items same as the sample count on the panel, then press the [PCS] button to confirm the
sampling. Put all the items slowly on the panel and press [PCS] button to count overall quantity.
During the counting, press the [M] button and [PCS] button to switch between the weight and
pieces, so you can get the weight and quantity at the same time.
*Caution*: Before the counting work, make sure you have placed the items onto the panel or that
you have chosen the sample count and then put the items.
[M] Calibration
Calibration is NOT required before first use. You only need to calibrate if the scale is not weighing
properly. You need a fixed weight for calibration.
Turn on the scale. Press and hold the [M] button for a few seconds – the display will show the
default calibration weight or the previous record.
If you do not have the same calibration weight, press the [M] button again to choose the other
calibration weight options. There are several weight options to choose from: ‘500.00’, ‘400.00’,
‘300.00’, ‘200.00’, ‘100.00’ & ‘50.00’. Select the fixed calibration weight that you have.
