1133 W. 27th Street, Cheyenne, WY 82001, USA
|
www.mybrewista.com
Toll Free in North America: 888-538-8683
|
Local: 307-222-6086
• Washing Instructions
•
Hand wash with mild soapy water.
•
Dry the exterior of the kettle with a soft cloth or leave to dry on a
dish rack.
- OR -
•
Turn kettle upside down and wash in a dishwasher.
•
Note: Do not wash the lid and temperature gauge in the dishwasher.
- Hand wash the lid and temperature gauge with mild soapy
water.
- Dry the exterior of the lid and temperature gauge with a soft
cloth or leave to dry on a dish rack.
•
Take the lid off of the kettle.
•
Use a pair of needle-nosed pliers or similar tool to adjust the
three tabs of the kettle lid. If you push in the tab, the lid tension
will be reduced and easier to put on and take off. If you pull out
the tabs the lid will be harder to pull off.
•
After adjusting the tabs, replace the lid and remove it again to
see if the adjustment is correct.
•
Repeat the above steps until you have adjusted the lid to your
preference.
•
When mineral scale builds up in the kettle, it can affect tempera-
ture consistency and slow down heating time.
•
To ensure optimum performance, Brewista recommends
descaling the kettle when mineral build-up is visible inside the
kettle.
Note:
Vinegar may not effectively descale the kettle and can be
difficult to thoroughly rinse. Vinegar may also leave behind an odor
that could affect future use.
Brewista recommends using Cafetto™ Descaler.
How to use Cafetto™ Descaler:
•
Mix 1 packet Cafetto™ Descaler with 40 oz.
of lukewarm water.
•
Pour the solution into the kettle.
•
Bring the solution to a boil.
•
Let the vessel cool for 15 minutes, then
discard the solution.
•
Rinse thoroughly with fresh water.
• Changing the Temperature Gauge
• Adjusting Kettle Lid Tension
•
Turn the top rim of the kettle’s lid counter-clockwise to remove
and set aside in a safe place.
•
Pull out the temperature gauge.
•
Replace with a new temperature gauge and re-assemble
the lid.
•
Remove the lid.
•
Fill the kettle to or below the Max fill line (1.2 L) with cold water.
•
Place lid onto the kettle with vent holes facing
away
from
the handle.
•
Place kettle on lit stovetop or induction heater.
•
Bring water to the desired temperature as displayed on the
temperature gauge.
• Descaling
1)
2)
Smart Pour™ Stovetop Kettle
with temperature gauge
WASHER
SAFE
BKS12S01G2TG
• Using the Kettle
