9
❺ Cleaning and Maintenance:
•
This appliance contains no user-serviceable parts and requires little maintenance.
◦
Refer any servicing or repairs to qualified personnel.
•
Clean your NutraMilk regularly.
◦
Clean the outside of the base (8) and the attached arm (7) with a damp, soft
cloth (Illus. L). Use the included brush to clean the mesh portions of the inner
filter (5).
•
Disassemble and clean the basins, blades, and wiper blades with dish detergent and
rinse thoroughly with water OR wash in a dishwasher (top rack recommended).
◦
Do not use abrasive cleaners.
◦
All parts except the base (8) are dishwasher safe - top rack recommended.
◦
After cleaning, dry all components thoroughly prior to storage.
WARNING: Never immerse the base in water or other liquids (Illus. M).
WARNING: Always unplug the appliance prior to cleaning.
❻ Storage:
•
Clean and dry all parts before storing.
•
Store the NutraMilk in its box or in a clean, dry place out of reach of children.
•
Never wrap the power cord around the appliance.
❼ Troubleshooting:
•
If the LCD displays “Er” when any function button is pressed, the components have
not been assembled correctly. Unplug the unit and re-assemble its components.
•
If the wiper drive gear (6) does not line up when lowering the arm (7) into place,
rotate the wiper blades (2) a quarter turn by hand and lower arm again.
•
LCD displays “OL” - The NutraMilk is equipped with overload protection to protect it
from electrical overload. When a power overload is detected, the LCD display will
blink “OL” and all button lights will blink. Unplug the unit and ensure there is nothing
blocking the blades.
•
START/STOP button (22) is not working - If no function was chosen prior to pressing
the START/STOP button (22), the LCD readout (16) will blink “00” for 3 seconds.
Choose a function button (BUTTER, MIX, or DISPENSE) and press the START/STOP
button (22) again.
L
M
