3
SPECIFICATIONS AND REQUIREMENTS
BEC-110 SPECIFICATIONS:
Read and follow instructions carefully before installing your BREW EXPRESS in-the-wall
COFFEE SYSTEM. For best results, it is advised that you hire a qualified professional.
1. Overall Dimensions
12 1/4” X 13 1/2” X 7 3/4” (see below).
2. Electrical Requirements
120VAC, 60HZ. (1400 watts).
3. Water Requirements
1/4” OD water supply line (copper or poly) 30 psi to 90 psi. Potable COLD water is required.
NOTE:
If water is not available, a 5 gallon dispensing jug can be used with a pump (not supplied).
Contact Brew Express for more information.
Please Note: FILTER REQUIREMENTS
1. A filter and shut off valve at water source is strongly recommended and required for hard-water use.
2. The filter, such as an ice maker type filter (for soft-water use) can easily be installed at the source
3. Hard-water designed filter is required if you have hard-water, and must be maintained to ensure product
warranty and to avoid blockage from hard-water particles. (Please see recommended hard-water filters at
www.brewexpressdirect.com .)
4. If water lines are not purged or clear of debris or a filter is not installed, foreign particles (debris) in water may
clog brewer system causing failure, and will void all warranties.
