8
Setting the clock time or alarm time
Setting the clock
1.
Press and hold the SET button for approximately 3 seconds until the hours digits
start to flash.
2.
Use the + or - buttons to select the hour. Your Wake Cup uses a 12 hour clock with
an AM or PM indicator showing whether it is day time or night time. When setting
the hour, make sure that the AM or PM indication is correct.
3.
Press the SET button. The minutes digits will flash.
4.
Use the + or - buttons to select the minutes
5.
Press the SET button. The clock is now set.
Setting the Alarm Time
1.
Press the ALARM button. The alarm icon ( ) will flash.
2.
Press and hold the SET button for approximately 3 seconds until the hours digits
start to flash.
3.
Use the + or - buttons to select the hour. Your Wake Cup uses a 12 hour clock with
an AM or PM indicator showing whether it is day time or night time. When setting
the hour, make sure that the AM or PM indication is correct.
4.
Press the SET button. The minutes digits will flash.
5.
Use the + or - buttons to select the minutes
6.
Press the SET button. The alarm time is now set. Note that the alarm icon ( ) will
appear in the display to show that the alarm has been set and is
active
. If you
do
not
wish the alarm to go off at the selected time, press the SET button and the
alarm icon ( ) will disappear.
You can check what time the alarm is set to go off by pressing the ALARM button. The
alarm time will be shown for a few seconds then your Wake Cup will revert back to
displaying the current time.
