14
15
PAge heAder.....
PAge heAder.....
OPERATING yOUR BREvILLE SMART TOAST™
To toast crumpets:
1.
Place the crumpets into the toasting
slots with crumpet tops facing inwards
as per the crumpet markings on the top
cover plate above the centre elements of
the toaster.
2.
To select the CRUMPET setting,
press the CRUMPET/FRUIT BREAD
button once and the button will
illuminate white.
3.
Select the desired browning setting by
adjusting the browning control slide on
the front of the toaster.
4.
Press the TOAST/CANCEL button
and the surround will illuminate in red.
The crumpets will automatically lower
into the toasting slots. The middle
and side heating elements will
automatically adjust.
5.
The LIFT & LOOK™ button surround
will also illuminate in white allowing the
toasting progress to be checked and, if
necessary, cancel the cycle by pressing
the TOAST/CANCEL button when the
desired toast colour is achieved.
6.
Approximately 10 seconds before the
end of the selected browning setting,
the LIFT & LOOK™ button will cease
illumination. As the toasting stops and
the carriage rises, the TOAST/CANCEL
button surround will flash and the LED
toasting progress indicator will cease
flashing. The LED toasting progress
indicator will re-illuminate to the
previously selected browning setting.
7.
Once the toasting cycle has finished and
the carriage has risen and locked into
the raised position, the toast ready alert
will sound. Remove the crumpets. The
TOAST/CANCEL button surround will
re-illuminate in white for up to
30 seconds, ready for the next toasting
cycle. The CRUMPET button surround
will remain illuminated and should be
pressed once to cancel if a subsequent
toasting function is required. The
CRUMPET button surround will cease
to illuminate after 30 seconds or when
the appliance is switched off at the
power point.
NOTE
Place the crumpets into the toasting
slots with crumpet tops facing
inwards as per the crumpet markings
on the top cover plate above the
middle elements of the toaster.
FRUIT BREAD SETTING
Fruit bread, due to its higher sugar content,
needs less toasting time compared to
standard white bread.
The FRUIT BREAD setting automatically
adjusts the toasting time for fruit bread.
To toast fruit bread:
1.
Place the fruit bread into the toasting
slots.
2.
To select the FRUIT BREAD setting,
press the CRUMPET/FRUIT BREAD
button twice and the button will
illuminate blue.
3.
Select the desired setting by adjusting
the browning control slide on the front
of the toaster.
The browning settings range from
‘1’ (lightest) to ‘5’ (darkest).
4.
Press the TOAST/CANCEL button
and the surround will illuminate in red.
The fruit bread will automatically lower
into the toasting slots.
5.
The LIFT & LOOK™ button surround
will also illuminate in white allowing the
toasting progress to be checked and, if
necessary, cancel the cycle by pressing
the TOAST/CANCEL button when the
desired toast colour is achieved.
OPERATING yOUR BREvILLE SMART TOAST™
6.
Approximately 10 seconds before the
end of the selected browning setting,
the LIFT & LOOK™ button will cease
illumination. As the toasting stops and
the carriage rises, the TOAST/CANCEL
button surround will flash and the LED
toasting progress indicator will cease
flashing. The LED toasting progress
indicator will re-illuminate to the
previously selected browning setting.
7.
Once the toasting cycle has finished and
the carriage has risen and locked into
the raised position, the toast ready alert
will sound. Remove the fruit bread. The
TOAST/CANCEL button surround will
re-illuminate in white for up to
30 seconds, ready for the next toasting
cycle. The CRUMPET/FRUIT BREAD
button surround will remain illuminated
in blue and should be pressed once or
twice to cancel if a subsequent toasting
function is required. The CRUMPET/
FRUIT BREAD button surround will
cease to illuminate after 30 seconds or
when the appliance is switched off at the
power point.
DEFROST BUTTON
This feature activates additional toasting
time required to toast frozen bread.
To toast frozen bread:
1.
Place the bread into the toasting slots.
2.
Select the desired browning setting by
adjusting the browning control slide on
the front of the toaster.
3.
Press the TOAST/CANCEL button and
the surround will illuminate in red then
press the DEFROST button and the
surround will illuminate in white. The
bread will automatically lower into the
toasting slots. The toasting time will
automatically increase.
4.
The LIFT & LOOK™ button surround
will illuminate in white allowing you
to check on the toasting progress
and, if necessary, cancel the cycle by
pressing TOAST/CANCEL button when
the desired toast colour is achieved.
Approximately 10 seconds before the
end of the selected browning setting,
the LIFT & LOOK™ button will cease
illumination.
5.
As the toasting stops and the carriage
rises, the TOAST/CANCEL button
surround will flash and the LED toasting
progress indicator will cease flashing.
The LED toasting progress indicator will
re-illuminate to the previously selected
browning setting.
6.
Once the toasting cycle has finished
and the carriage has risen and locked
into the raised position, the toast ready
alert will sound. Remove the toast. The
TOAST/CANCEL button surround will
re-illuminate in white for up to
30 seconds, ready for the next toasting
cycle. The DEFROST button surround
will remain illuminated and should be
pressed once to cancel if a subsequent
toasting function is required. The
DEFROST button surround will cease to
illuminate after 30 seconds or when the
appliance is switched off at the power
point. The DEFROST button works for
frozen crumpets as well.
LIFT & LOOK
™
BUTTON
This feature automatically raises and lowers
the carriage so you can check progress
without interrupting and/or cancelling the
toasting cycle.
To select this feature:
1.
The LIFT & LOOK™ button surround
will illuminate in white during the
