background image

10

care and cleaning

 Do not use harsh abrasives, chemical cleaners or solvents to clean the exterior 

of your iron because they will damage the surface.

Cleaning the soleplate of your Iron

After each use, allow your iron to completely cool down before wiping the soleplate with 

a soft damp cloth. If polyester has burnt to the soleplate, iron a damp cotton cloth while 

your iron is still hot. If necessary, allow your iron to completely cool down then wipe over 

the soleplate with a soft cloth moistened with methylated spirits. Remove the methylated 

spirit with a damp cloth. Make sure that the soleplate is completely dry.

Self-cleaning

 Only press the self-clean button when you want to activate the self cleaning 

system. Never press the self-clean button when ironing.

The self-clean function removes scale and impurities. Use the self-clean function once 

every two weeks. If the water in your area is very hard, the self clean function should be 

used more frequently.

Ensure your iron is switched off and unplugged from the mains supply socket. 
Set the steam control to the no steam (

) position.

Fill your iron with water to the MAX level.

Stand your iron on its heel rest, plug in and switch on at the mains supply.

Set the temperature control dial to the highest (MAX) setting. Allow your iron to heat 

up until the temperature indicator light goes out. 

Unplug your iron and hold it over a sink with the sole-plate facing downwards.

Press and hold the self-clean button. Hot water and steam will be ejected from the 

holes in the soleplate along with any impurities.

Release the self-clean button after one minute or when the water tank is empty.
Stand your iron on its heel rest, plug it in to the mains supply socket and switch on. 

When the temperature indicator light goes out, iron an old piece of cloth to allow any 

remaining water to escape.

After use, switch off and unplug your iron from the mains supply and allow it to fully 

cool. Empty out any remaining water.

1.
2.
3.
4.
5.

6.
7.

8.
9.

10.

Содержание Technique

















Отзывы: