Breville Quick Roast BMO715, Инструкция пользователя

Страница: 12 / 20

11
ASSEMBLING YOUR BREVILLE PRODUCT
WARNING
• When using the grill rack, ensure it
is placed securely in the centre of the
turntable, avoiding any contact with the
surrounding cavity. Contact with the cavity
will result in sparking and could damage
the microwave.
• Ensure plates are grill, oven and microwave
safe. Avoid placing Pyrex on the grill rack
in the upper position as it may overheat
and shatter.
• To avoid an electrical circuit overload, it
is recommended that no other appliances
are plugged into the same circuit as your
microwave oven (or other products) when
it is in use.
• Do not install oven over a range cooktop or
other heat-producing appliances. If installed
near or over a heat source, the oven could be
damaged and the warranty would be void.
• Check the oven for any damage, such as
misaligned or bent door, damaged door
seals and sealing surface, broken or loose
door hinges and latches and dents inside
the cavity or on the door. If there is any
damage, do not operate the oven and
contact a Breville service centre.
• Do not immerse the microwave oven, power
cord or plug in water or any other liquid.
SETTING THE CLOCK
When power is activated, the LED will display
0:00 and the buzzer will beep once.
1. Press and hold DEFROST button for
3 seconds, the hour figure will flash.
2. Turn dial to adjust the hour figures, the
input time should be within 0–23.
3. Press START button, the minute figures
will flash.
4. Turn dial to adjust the minutes figures, the
input time should be within 0–59.
5. Press START button to finish clock setting.
‘:’ will flash, and the time will illuminate.
NOTE
During the process of clock setting, if you
press STOP/CLEAR, the oven will go back
to the previous status automatically.
In the event of a power failure or if the
microwave is unplugged, the clock will
have to be reset.