4. Select the required function (Blend, Smoothie
or Ice/Auto Pulse) by pressing the
corresponding function button. The blender
will start to operate and only the selected
function button will illuminate. The ‘Power’
button will continue to flash.
The speed can be changed at any time during
the blending process. Each time a new
function is selected its button will illuminate
and the previous function button illumination
will go out.
5. For ice-crushing or ingredients that require
short bursts of power, select the Ice/Auto
Pulse button. The blender will start to operate
and the Ice/Auto Pulse button will illuminate.
The 'Power' button will continue to flash.
The pre-programmed functions have been
designed to run for a specific time.
6. To stop blending at any time, press the
selected speed button. The ‘Power’ button
can also be pressed, but this will also turn the
appliance off and all illuminations will
go out.
7. At the end of use, always ensure the Breville
Professional 800 Collection Blender is turned
off by pressing the ‘Power’ button on the
control panel. Then switch the appliance off at
the power outlet and unplug the cord. Ensure
the motor and blades have completely
stopped before attempting to move the
appliance, or when the Breville Professional
800 Collection Blender is not in use and
before disassembling, cleaning and storing.
HOW TO USE YOUR BREVILLE PROFESSIONAL 800 COLLECTION BLENDER
NOTE: Operate the blender only for
the appropriate amount of time
required. The Professional 800
Collection Blender will
automatically stop blending on
the Blend function after 120
seconds (2 minutes) and after
60 seconds (1 minute) on the
Smoothie and Ice/Auto Pulse
functions to avoid over
processing.
NOTE: The Smoothie function has a
unique processing technique
that blends the denser
ingredients at a lower function,
then increases as ingredients
thicken. This may happen
several times while blending
smoothies.
NOTE: During the blending process,
ingredients may stick to the
sides of the blender jug. To
push the food back onto the
blades, press the ‘Power’
button on the control panel
and switch off at the power
outlet and remove the power
cord. Remove the lid and use
a plastic spatula to scrape
down the sides of the jug.
Replace the lid before
recommencing blending.
HOW TO USE YOUR BREVILLE PROFESSIONAL 800 COLLECTION BLENDER
13
12
Function
Programmed Time
Blend
120 seconds (2 minutes)
Smoothie
60 seconds (1 minute)
Ice/ Auto Pulse
60 seconds (1 minute)
DISASSEMBLING THE BLENDER
1. Always ensure the Breville Professional 800
Collection Blender is switched off by pressing
the ‘Power’ button on the control panel. Then
switch off at the power outlet and unplug the
power cord.
2. Remove the blender jug from the motor base
by grasping the handle and lifting the jug in
an upward direction.
Remove the blade assembly by upturning
the blender jug and turning the Blade
Removal System clockwise (see Fig 7),
then lift upwards and away from the base
of the blender.
3. Remove the silicon seal from the blade
assembly (see Fig.8).
FIG 7
FIG 8
NOTE: If the blades become stuck,
the blender will automatically
turn off. To reset turn the
blender off at the power outlet,
clean jug with spatula and then
turn back on, blender will reset.
NOTE: If any moisture or liquid
appears on top of the motor
base during blending, press
the ‘Power’ button on the
control panel, switch off at
the power outlet and remove
the power plug. Remove the
blender jug. Wipe the motor
base immediately with a dry
cloth or paper towelling
to absorb the liquid. Check
the blender jug is correctly
assembled.
BR8612 800BL IB MAY07 AUST_FA.qxd:BR8612 800BL IB MAY07 AUST 27/7/07 11:59 AM Page 12
