Breville LTA842, Инструкция

Страница: 8 / 12

8
Functions
BEFORE FIRST USE
Before first use, remove any packaging material
or promotional labels attached to your toaster.
1. Place the toaster on a dry, level heat
resistant surface and unwrap the power
cord from the base of the toaster.
1. Insert the power plug into a 220-240 volt
power outlet and then turn the power on.
NOTE
When using the toaster for the first time, we
suggest toasting on the maximum setting
without bread. The toaster may emit a thin
smoke or distinct odour on initial use. This is
normal and not detrimental to the performance
of the toaster .
2. Place only 1 slice of bread into each of
the toasting slots. Ensure the bread slices
are not too large or thick to fit the slots. If
less than 4 slices are inserted, the usual
browning setting may need to be reduced to
avoid the toast burning.
3. Select the desired browning setting using
the browning control dial. Colour settings
range from ‘1’ lightest to ‘6’ darkest.
NOTE
When using the toaster for the first time, we
suggest toasting the bread on setting 3 or 4.
Varying types of bread and personal preference
may require a different browning setting, for
example, raisin toast and white light-textured
breads may require a lower setting, whilst
heavier textured rye breads may require
a darker setting.
4. Press the carriage control lever down until
it locks into position. The toasting cycle will
automatically commence.
NOTE
If the toaster is not plugged in and switched on
at the power outlet, the carriage control lever will
not lock into position.
5. The toaster stops toasting when it has
reached the end of the selected browning
cycle. The toast will automatically rise in the
slots. The toasting process can be stopped at
any time by pressing the CANCEL button.
WARNING
Do not leave unattended when in use as toast
may jam or wedge in the bread carriage. Never
attempt to extract toast, crumpets or muffins or
any other item that has jammed or wedged in
the toaster with a knife or any other object, as
contact with live elements may not only damage
the elements, but can cause electrocution.
‘LIFT & LOOK’™ FEATURE
This feature can be used to check on the
progress of the toasting cycle without
interrupting it. Simply raise the carriage control
lever to check on the browning progress of the
toast and lower it down again if you wish to
continue to toast.
HIGH LIFT FEATURE
Once the toasting cycle has completed, to
remove smaller items such as crumpets and
muffins, lift the carriage control level to the
HIGH LIFT position, approximately 1cm above
the starting position. In the unlikely event that
the bread, crumpet or muffins become jammed,
switch the power off at the power outlet, then
remove the power plug from the power outlet
and use the high lift lever to carefully ease the
bread out of the toaster, ensuring that you do not
damage the self-centring slots or the elements.