Breville Lift & Look Pro BTA720, Инструкция

Страница: 10 / 12

18 19
PAge heAder..... PAge heAder..... oPERATING oPERATING
CRUMPET/FRUIT BREAd BUTToN
The crumpet feature activates additional
heat to the middle heating elements to
perfectly toast the insides of your crumpet
without burning the outside.
To toast crumpets:
1.
Place the crumpet into the toasting
slots with the inside of the crumpet
facing inwards as per the crumpet
markings above the middle heating
elements of the toaster.
2.
Select the desired browning setting by
adjusting the browning control slide
on the front of the toaster. There are
12 browning settings ranging from
'1' (lightest) to '5' (darkest).
3.
To select the CRUMPET setting, press
the CRUMPET button and the button
surround will illuminate white. To start
the toasting process, press down the
lever until it locks into place.
NoTE
It is normal for the outside heating
elements to appear off or on a lower
power during the Crumpet setting. This
ensures the inside of your crumpet
toasts without burning the outside.
4.
After the cycle has finished, press
the CRUMPET button to deselect
the setting if toasting other types
of bread.
To toast fruit bread:
1.
Place the fruit bread into the toasting
slots.
2.
To select the FRUIT BREAD setting,
press the CRUMPET/FRUIT BREAD
button twice and the button will
illuminate blue.
3.
Select the desired setting by adjusting
the BROWNING CONTROL slide on
the front of the toaster.
4.
The browning settings range from
'1' (lightest) to '5' (darkest).
5.
To start the toasting process, press
down the LIFT & LOOK lever until
it locks into place.
6.
Once the toasting cycle has finished
and the carriage has risen and locked
into the raised position, the toast ready
alert will sound. Remove the fruit bread.
The CRUMPET/FRUIT BREAD button
surround will remain illuminated in
blue and should be pressed once to
cancel if a subsequent toasting function
other than fruit bread is required. The
CRUMPET/FRUIT BREAD button
surround will cease to illuminate after
30 seconds or when the appliance is
switched off at the power point.
FRoZEN BUTToN
This feature activates additional toasting
time required to toast frozen bread.
To toast frozen bread:
1.
Place the bread into the toasting slots.
2.
Select the desired browning setting
by adjusting the browning control slide
on the front of the toaster. There are
12 browning settings ranging from
'1' (lightest) to '5' (darkest).
3.
To select the FROZEN setting, press
the FROZEN button and the button
surround will illuminate white. To
start the toasting process, press down
the lever until it locks into place. The
toasting time will automatically increase.
4.
After the cycle has finished, press
the FROZEN button to deselect
the setting.
LIFT & LooK™ LEvER
This feature raises and lowers the carriage
so you can check the toasting progress
without interrupting and/or cancelling the
toasting cycle. During the toasting cycle,
simply lift the lever to view the toasting
progress. Lower the lever to continue the
cycle or press the CANCEL button to stop
the cycle at any time.
HIGH LIFT LEvER
The lever can be lifted approximately
1cm above the starting position. This raises
the carriage making it easier to remove
smaller items such as English muffins.
ToAST REAdy ALERT
A toast ready alert will sound when the
toasting cycle has finished and the carriage
has risen and locked into the raised position.
The default volume setting for the toast
ready alert is 'High' but can be adjusted to
'Low' or 'Mute'.
Adjusting the volume of the Toast
Ready Alert
Press and hold down the CANCEL button
for 2 seconds until the A BIT MORE™,
CRUMPET and FROZEN buttons
illuminate. While these buttons are
illuminated, adjust the volume as follows:
Mute:
Press the FROZEN button. The button
surround light will flash three times.
Low:
Press the CRUMPET button. The toaster
will beep three times with low volume.
High:
Press the A BIT MORE™ button. The toaster
will beep three times with high volume.