14
IMPORTANT
All operating modes will be cancelled if the
water tank runs empty. The humidifier will
automatically shut off when there is insufficient
water to operate.
MANUAL MODE
The humidity level and mist intensity can be
manually set in a number of ways.
To set MANUAL mode
•
From ADJUSTABLE HUMIDITY,
touch or slide your finger along the
MIST LEVEL
CONTROL bar on the control panel to
change the mist intensity as desired.
•
From ADJUSTABLE SPEED, touch the
HUMIDITY/NIGHT symbol on the control
panel repeatedly to cycle through until the
desired RH flashes on the display screen.
NOTE
Both mist intensity and the humidity can be set
together on Manual mode.
The mist intensity levels can be manually
selected between Low (1) to High (5).
The humidity level can be manually selected
between 30% and 90%RH.
The Timer, Night mode, Warm Mist and ION
features can be used with this setting.
The mist intensity will stop when the humidity
level has been reached. The display will
alternate between the word ‘Hi’, the current
temperature and the current humidity level.
If the humidity in the room is higher than
the selected humidity, ‘HI’ will display on
the display screen and the user cannot enter
Manual mode. To enter Manual mode, the user
must select a humidity level that is higher than
the room humidity.
NIGHT MODE
•
In NIGHT mode, the humidifier turns off the
lights, except the blue mood light found in
the water tank.
•
Night mode can be selected in all modes.
•
The Timer feature and Warm Mist feature can
be used with this setting.
1. Touch and hold the HUMIDITY/NIGHT
symbol on the control panel. All the lights
will turn off, except the mood light in the
water tank, and the POWER symbol will
flash slowly.
NOTE
Turn off the mood light manually before setting
Night mode if not needed. Touch and hold the
WARM MIST/ION symbol to turn off the
mood light in the water tank.
To reactivate the mood light, touch and hold the
WARM MIST/ION symbol. The mood light
will illuminate.
2. Touch the POWER symbol to reactivate
the control panel. The control panel lights
will illuminate and the humidifier is ready to
be adjusted. Once the mode is adjusted, the
control panel will dim back into Night mode.
3. To cancel night mode, touch and hold the
HUMIDITY/NIGHT symbol again for
3 seconds. The control panel lights will
illuminate and the humidifier will continue to
operate in the chosen mode.
TIMER
This humidifier has a Timer feature that
will turn the humidifier off after a chosen
number of hours.
1. Touch the TIMER symbol on the control
panel repeatedly to cycle through 1 to 12
hours. The set time, current relative humidity
and the temperature will alternate on the
display screen.
2. When the desired number of hours is
displayed, it will flash 3 times before starting
the countdown.
3. The Timer will begin to count down in 1-hour
increments. The humidifier will automatically
turn off once the chosen time has elapsed.
4. To cancel this feature, touch and hold
the TIMER symbol until ‘TIMER’ and
the number of hours disappear from the
display screen.
