3
BEFORE USING YOUR KETTLE
1 Remove any packaging and
promotional material from the kettle
and position on a dry, level, secure
work surface away from the edge.
2 Before connecting to a power source,
make sure your mains supply voltage
is the same as the one indicated on
the base of this appliance. Connect
the plug to a suitable power outlet and
ensure that the power cord does not
overhang the work surface.
3 Remove the kettle from the power
base and press the lid release button
to open. Fill the kettle to the
maximum indication mark on the body
and close the lid.
4 Place the kettle back onto the power
base. Ensure the kettle is not over-
filled. Always compare the water level
against the maximum water mark,
with the kettle positioned on the
power base.
5 Turn on the kettle by pressing the
ON/OFF switch down.
Bring to the boil and then discard the
water. Repeat this procedure two more
times. This removes any residues that
may have remained from the
manufacturing process. Remove and
rinse the filter before use. See cleaning
the filter section.
