Breville Easy glide 2200W, Инструкция пользователя

Страница: 8 / 16

8
using your iron
Ironing without steam
If you intend to dry-iron fabrics there is no need to fill the water tank. However, if water is
already in the water tank, you don’t need to empty it.
1. Set the steam control to the off (
0
) position.
2. Plug your iron into the mains supply and switch on.
3. Rotate the temperature control dial until the desired setting is aligned with the dial
pointer.
4. The temperature indicator light will illuminate while your iron is heating up. When the
light goes out, your iron is ready to use.
Steam ironing
During steam ironing, if you do not allow your iron to reach the selected
temperature water may drip from the soleplate.
It is recommended that for harder to iron fabrics such as cotton and linen, steam should
be used when ironing.
When ironing cotton and linen, always select the highest temperature. Steam should
never be used on delicate fabrics like nylons, acrylics and synthetics.
1. Fill your iron with water.
2. Plug your iron into the mains supply and switch on.
3. Set the temperature control dial to the
lll
setting. The hotter your iron, the more
steam is generated.
4. The temperature indicator light will illuminate. When the temperature indicator light
goes out your iron is ready to use. The temperature indicator light will turn on and off
during ironing as your iron maintains the correct temperature.
5. Your iron has three steam settings LO , HI and off ( 0 ). Adjust the steam control to
select the desired steam output.
6. The steam can be shut off at any time by setting the steam control to the off ( 0 )
position.
Burst of steam
The temperature control dial must be set within the
ll
and
lll
setting. Wait several
seconds between each press of the steam button.
Press the shot of steam button whenever you have a stubborn crease that needs extra
steam. Steam will burst from the holes in the soleplate of your iron into the fabric.