8
OPERATION INSTRUCTIONS
1. Plug unit into power socket, unit will
beep once and power LED will illuminate
(currently in stand-by mode) and show the
current room humidity on the display.
2. Press Power button
to turn unit on.
3. Press Fan Speed button
to set the
desired speed High or Low.
4. Press
to set the desired humidity level
in the room, which can be set from 40% to
80% at 5% intervals.
NOTE
When the ambient relative humidity is
2% lower than the selected humidity, the
compressor will switch off and the fan will stop
3 minutes later. When the ambient relative
humidity is equal to or higher than the selected
humidity by 2%, the compressor will restart
once the compressor protection time of
3 minutes has lapsed.
5. Press the timer button
to select On/Off
timer.
To set automatic ON timer, press timer
button when unit is in standby mode. Select
the desired time for unit to start operating
(from 1 hour to 24 hours at 1 hour intervals).
To set automatic OFF timer, press timer
button when unit is ON. Select the desired
time for unit to start operating (from 1 hour
to 24 hours at 1 hour intervals) Unit will
automatically switch off once selected off
time duration has lapsed.
To cancel the timer program press the timer
button so that it is set to 00.
NOTE
The timer circulates from 00-01-02-03…23-24.
PRODUCT SPECIFICATIONS
CLI-DH10C AIR DEHUMIDIFICATION SYSTEM
DEHUMIDIFICATION
10 LITRES/DAY (at 30°C/80% relative humidity)
POWER CONSUMPTION
245 Watts
CAPACITY OF WATER TANK
1.9 Litres
NOISE LEVEL
<43dB (low fan speed) - <46dB (high fan speed)
PRODUCT DIMENSIONS
H 470 x W 185 x L 276 mm
NET WEIGHT
9.9 kgs
GROSS WEIGHT
11 kgs
Functions