![background image](http://html.mh-extra.com/html/breville/brita/brita_instructions-for-use-manual_2809312008.webp)
8
Using Your Hot Cup
Before using your Hot Cup for the first time
•
Remove your Hot Cup carefully from the box. Remove any packaging and
promotional material and position your Hot Cup on a dry, level, secure work surface
away from the edge.
•
Follow the instructions below and discard the first full tank of water. This will remove
any residues that may remain from the manufacturing process.
•
Fit the filter funnel and the BRITA
®
MAXTRA
®
water filter and set the BRITA
®
Memo
—see pages 6 and 7.
Using your Hot Cup
Always position your Hot Cup in such a way that the start button cannot be
accidentally operated, especially by children. As you use your Hot Cup, a certain
portion of the water boiled will be transferred back to the water reservoir. This
will mean the water reservoir may become hot. Always use care when handling
your Hot Cup.
1.
Press the lid flap release button to open the lid flap.
2.
Fill the filter funnel from your cold tap up to the MAX mark on the filter funnel. Allow
the water to filter through into the water chamber. Repeat until the water level in the
chamber is no higher than the MAX marking on the water chamber.
3.
Close the lid and press the stop button. This will make sure that your hot cup will not
immediately start a boil cycle when you place it onto the power base.
4.
Connect your Hot Cup
to a mains supply socket.
5.
Place a suitable cup or container with a tea bag, coffee, sugar, etc. below the
dispensing nozzle. Never operate your Hot Cup without a cup or suitable container
placed below the dispensing nozzle. Adjust the dispensing control to the required
setting. The control adjusts the quantity of boiling water dispensed by your Hot Cup.
For smaller cups like teacups, set the control towards the
setting; for larger cups
like coffee mugs, set the control towards the setting. If you are not sure which
setting to use, it’s best to use a lower setting until you gain experience using your Hot
Cup.
6.
Press the start button. The body will light up blue and your Hot Cup will start to boil.
7.
The selected quantity of boiling water will be dispensed into the cup. Your Hot Cup
is now ready to use again. If, after just having boiled, the start button doesn’t operate,
simply wait a few seconds before trying it again.
Stopping your Hot Cup
If you have started the boil procedure and then decide you want to stop your Hot Cup for
any reason, simply press the stop button. You can also stop water that is being dispensed
by pressing the stop button. The boiled water will be safely transferred back into the
water reservoir.
Содержание Brita
