7
operating your Breville ikon™ Quiet Boil Kettle
ThIs appl Ian Ce Is des Igned for The BoIl Ing of dr InKIng Qual ITy waTer onl y, never
use IT To hea T or BoIl any o Ther l IQuIds or foods Tuffs. The l Id should al ways Be
f Irml y In pla Ce and lo CKed Closed Before use.
Before first use
Remove
any
promotional
material
attached
to
your
kettle.
It
is
recommended
that
before
first
use
the
kettle
is
filled
to
the
maximum
level,
boiled
and
water
discarded.
Your
kettle
will
only
operate
when
positioned
on
the
power
base
with
the
On/Off
switch
in
the
‘On’
position.
The
kettle
will
automatically
switch
off
once
the
water
has
boiled.
operation of your kettle
1.
To
fill
the
kettle,
remove
it
from
the
power
base
and
open
the
lid
by
pressing
the
lid
release
button.
Fill
with
the
desired
amount
of
water.
Always
fill
the
kettle
between
the
minimum
and
maximum
marks
on
the
water
window.
Too
little
water
will
result
in
the
kettle
switching
off
before
the
water
has
boiled.
2.
Ensure
that
the
lid
is
locked
firmly
into
place.
Place
the
kettle
firmly
onto
the
power
base.
Power
plug
the
power
cord
into
230/240V
power
point
and
switch
‘On’.
3.
Press
the
On/Off
switch
to
the
‘On’
position.
The
power
‘On’
light
and
the
water
gauge
will
illuminate.
a
lways fill the kettle between the minimum
(min) and the maximum (max) marks on the
exterior of the kettle. Too little water will result
in the kettle switching “off” before the water
has boiled. f illing above the maximum mark on
the exterior of the kettle may result in boiling
water splashing from the kettle.
This kettle must only be used with the power
base supplied. use caution when pouring water
from your kettle, as boiling water will scald. do
not pour the water too quickly.
The
kettle
will
automatically
switch
‘Off’
once
the
water
has
boiled.
Lift
the
kettle
from
the
power
base
and
pour
the
water.
Take
care
to
hold
the
kettle
level,
especially
when
filled
to
the
maximum
level.
To
re-boil
it
may
be
necessary
to
wait
for
a
few
seconds
to
allow
the
control
to
reset.
The
kettle
may
be
stored
on
its
power
base
when
not
in
use.
The
power
point
should
be
switched
off
and
the
appliance
power
plug
unpower
plugged
from
the
power
when
not
in
use.
safety boil dry protection
The
kettle
is
fitted
with
a
safety
device,
which
protects
against
overheating
should
the
appliance
be
operated
with
insufficient
water.
If
this
occurs
the
kettle
will
stop
heating.
Switch
‘Off’
at
the
power
point
and
allow
kettle
to
cool
before
refilling.
The
safety
device
will
automatically
reset
when
the
kettle
has
cooled
down.
For
additional
safety
your
kettle
is
fitted
with
an
additional
thermal
cut
out.
In
the
event
of
overheating,
the
kettle
will
automatically
shut
down
to
prevent
further
damage.
Should
this
occur,
take
your
kettle
to
an
authorised
Breville
Service
Centre.
Содержание BKE570 - V C10
