![background image](http://html1.mh-extra.com/html/breville/aroma-style-bcm600/aroma-style-bcm600_instructions-for-use-manual_2808904005.webp)
Care and cleaning
9
Cleaning
Before cleaning ensure that the on/off button is in
the off position. Switch off at the power outlet,
unplug the power cord and allow the Coffee Maker
to cool.
Open the water tank lid and remove the stainless
steel mesh filter basket. The stainless steel mesh
filter basket, filter basket holder and carafe can
be washed in hot soapy water then rinsed and
dried thoroughly.
The outer housing can be cleaned with a soft, damp
cloth (do not use abrasive agents or cloths which can
damage the surface). The warming plate can be
wiped with a clean damp cloth when necessary.
Do not try to clean the inside of the water
chamber with a cloth, this will leave a residue
of lint and may clog your Coffee Maker. Just
rinse with cold water periodically.
Note
Removal of mineral deposits
Mineral deposits from hard water can build up
in the water tank and internal tubes. If these
deposits are not removed, the brew time will
be extended.
To remove mineral deposits
1. Fill the water tank to the maximum mark with
2
/
3
cold tap water and
1
/
3
white vinegar.
2. Ensure the filter holder is firmly positioned into
place. Close the water tank lid.
3. Position the carafe, with the lid on, on the hot
plate and switch the Coffee Maker on. Allow the
mixture to drip through the machine until the
cycle is complete.
4. Once the cycle is complete empty the carafe and
refill the water tank with water. Place the carafe
back into position on the hot plate.
5. Switch the Coffee Maker on and allow the fresh
water to drip through. Once the cycle is
complete, switch the machine off and empty the
carafe. Mineral deposits will have been removed
from the water tank and internal pipes.
Storage
•
Press the on/off button to off, switch off at the
power outlet and unplug.
•
Ensure all water has been removed from the
Coffee Maker.
•
Wash the mesh filter basket, carafe and lid in
warm, soapy water, rinse and dry thoroughly.
•
Replace all parts back into position in the Coffee
Maker and close the water tank lid.
•
Store upright on the bench top or in a cupboard.
Operating your Breville Aroma Style Coffee Maker
continued
Programming your Coffee Maker –
automatic operation
•
The clock has to be set to the time of day for the
automatic operation of the Coffee Maker.
To set the clock to the time of day:
1. Press the ’HOUR‘ button to select the current
hour time. Press and hold the ’HOUR‘ button to
scroll through numbers quickly. When the number
displayed approaches the desired setting, press
and release the button to advance one digit at a
time. (AM is indicated in the upper left hand
corner of the clock display and PM in the lower
left hand corner).
2. Press the ’MIN‘ button to select the current
minute time. Press and hold the ’MIN‘ button to
scroll through numbers quickly. When the number
displayed approaches the desired setting, press and
release the button to advance one digit at a time.
To select the automatic operation:
1. Press the ’PROGRAM‘ button. The word PROGRAM
will appear on the LCD to indicate an auto brew
time is being selected.
2. Select the time you want coffee to start brewing
by using the ’HOUR‘ button, then the ’MIN‘
button, following the same instructions for
setting the clock.
After selecting the auto brew start time, the
program indicator will automatically stop
flashing after a few seconds and the display
will return to the current time.
Note
3. To confirm your auto brew start time, simply
press the ’PROGRAM‘ button and the pre-set time
will be displayed for a few seconds on the LCD.
The PROGRAM indicator will continue to flash
while confirming the pre-set auto brew time. It
will automatically return to the current time after
a few seconds.
4. After setting the auto brew start time, prepare
coffee following the directions in ‘Brewing coffee’
Steps 1–7
5. Press the ‘AUTO ON’ button. The green auto on
light will illuminate and the word AUTO will be
displayed in the upper right hand corner of
the LCD.
6. Your Coffee Maker will automatically begin
brewing at the pre-set time. When the brew
cycle begins, on the LCD the ’AUTO‘ icon will
disappear and the ’ON‘ icon will be displayed.
The green auto on light will go out and the
red on light will come on to indicate the Coffee
Maker is in operation.
7. To re-set the auto brew time for the same pre-set
time for the next day, simply press the ’AUTO ON‘
button. The green auto on light will illuminate
and the word AUTO will again be displayed in the
upper right hand corner of the LCD.
Brewing tea
The Coffee Maker can be used for brewing tea if
desired. Simply place 4-6 teabags or teaspoons
of tea in the stainless steel mesh filter basket and
follow the same procedure as for brewing coffee.
It is advisable to thoroughly clean out the
coffee residue in the stainless steel mesh filter
basket and filter basket holder before brewing tea
and vice versa.
8
DO NOT IMMERSE THE DRIP FILTER COFFEE MAKER BODY IN WATER OR ANY OTHER LIQUID.
Содержание Aroma Style BCM600
Страница 7: ...Recipes Delicious recipes Includes instructions for use ...
Страница 9: ...Notes R5 Notes R4 ...