Bretford TVSW12AC, Руководство пользователя

Страница: 7 / 12

5 4
█ Install Power Cord Retention Clip
█ Power Cord Retention Clip
Install the bracket
1. Tighten the retention clip on the power cord.
2. Insert the power cord into the C13 Inlet on the
underside of the cabinet.
3. Make sure the clip is facing the wall side.
As you insert the power cord, attach the clip to
the small hole adjacent to the inlet.
Press to release the
power cord
Tighten the power cord
Pull up to release the clip and the
power cord from the cabinet.
Wall
Front door
C13 Inlet
4. Using a Phillips driver, attach the metal bracket
to the wall using the washers and T4 screws.
5. Install the cabinet onto the metal bracket.
Secure the cabinet using the washers and T4 screws into the lower part of cabinet.
Washer x 5pcs Self-tapping Screw X 5pcs
T4 x L30mm
3. Insert the wall plugs into the
holes.
2. Drill holes in the concrete wall about
Ø 1/4” X 1” deep at the mounting points.
Nylon wall plug x 5pcs
█
Mounting to Concrete Wall (min. 2 people)
Follow the Cabinet Space Requirements
1. Determine the installation points for your cabinet.