EE
Slide the H-frame between the legs as shown.
The
shorter side faces the rear.
Secure the frame to the legs
using screws (DD) and nuts (EE) as shown.
NOTE:
One
leg on the front side
DOES NOT GET HARDWARE
, this is
left open for the CPU holder. You decide whether to leave
the right or left side open.
DD
STEP 4
SHORTER SIDE
STEP 5
Insert each caster into the legs. If casters do not insert
easily, use a rubber mallet to tap each caster in place.
Make sure casters are
SECURELY
seated into the legs
before stand unit upright.
LEAVE OPEN FOR
CPU HOLDER (It can
be the right or left side )
STEP 2
STEP 3
Position one leg into the square bracket so that the
capped end is flush with the top of the shelf and the
holes face in as shown.
LOOSELY
attach with screws
(AA) and nuts (BB). Attach the remaining 3 legs in the
same manner.
BB
AA
Insert a self tapping screw (CC) approximately 3/4 of the
way into the first hole in each leg. Slide each leg down so
that the square bracket
rests on the shaft of the
self
tapping
screw
, not the head of the screw.
TIGHTEN ALL
SHELF HARDWARE.
CC
All manuals and user guides at all-guides.com
