3
General Safety Warnings
PLEASE READ AND STRICTLY FOLLOW ALL THE
SAFETY WARNINGS AND NOTICE BELOW.
Environment Requirements
• All polymers degrade with time. Do not unpack filament until necessary. Filament should be sto
-
red at clean and dry conditions.
Filament Storage
• Temperature: RT 15-30°C; Moisture: 20%-70%
Work Environment Safety
• You must always keep your workingspace clean.
• Dont use the 3D Printer near inflammable liquids, gas or dust.
• Keep the 3D Printer out of reach of children and untrained persons.
Electrical Safety
Personal Safety
Do not touch the nozzle and build plate during printing.
Do not touch the nozzle after finishing printing.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves
away from moving parts.
Do not operate the device while you are tired or under the influence of drugs, alcohol or
medication.
• Only connect the 3D Printer to a properly grounded power outlet.
• Do not use the 3D Printer in damp or wet locations. Do not expose the 3D Printer to burning sun.
• Avoid using the device during an thunderstorm.
• In case of uncertain accident, please unplug the device if you do not use it for long.
• Do not touch the nozzle and build plate during printing.
• Do not touch the nozzle after finishing printing
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves
away from moving parts.
• Do not operate the device while you are tired or under the influence of drugs, alcohol or
medication.
Cautions
• Do not leave the device unattended for long.
• Do not make any modifications to the device.
• To lower the build plate before loading/unloading filament. (The distance between the
nozzle and build plate should be kept for at least 50mm)
• Operate the device in a well-ventilated environment.
• Never use the device for illegal activities.
• Never use the device to make any food storage vessels.
• Never use the device to make any electrical appliance.
• Never put the model into your mouth.
