11
Humidity
comfort level
Ambient change
COMFORT
DRY
WET
Open
window
COMFORT
DRY
WET
Close
window
COMFORT
DRY
WET
COMFORT
MORE DRY, MORE WET OR NO CHANGE
off
off
DRY
NO CHANGE
off
off
DRY
MORE WET
on
off
DRY
MORE DRY
off
on
WET
NO CHANGE
off
off
WET
MORE WET
off
on
WET
MORE DRY
on
off
Main unit signal receivement check
The transmission range is about 50 meters from the outdoor sensor to the
main unit (in open area). The main unit should receive the temperature/
humidity information from the transmitter within 3-4 minutes after set-up.
Should the main unit not receive information from transmitter within 3-4
minutes after setting up, please check following steps:
1. Press and hold the touch control CH/ (12c) for 2-3 seconds to re-start
receiving from the transmitter; the data will normally be received within 3
minutes.
2. If the first step does not yield a desirable solution, please remove the
batteries and re-install them (hardware reset).
At the same time, please make sure the following:
1. The main unit as well as the sensor should be at least 5 to 6 feet (1.5 to
2 meters) away from any interfering sources, such as computer monitors
or TV sets.
2. The main unit should not stand close to metal window frames.
3. Please do not use other electrical products, such as headphones or
speakers, operating on the same signal frequency (433 MHz).
4. Electrical devices operating on the same signal frequency may also cause
interference. This can include devices used in the neighborhood as well.
Manual_7007402_Thermo-Hygrometer-VentAir_en-de_BRESSER_v012021a.indb 11
04.01.2021 16:38:56
