21 / 24
8.
In normal display mode, press the ALARM button sev-
eral times to enable alarm time AL1, AL2 or both. If the
alarm is enabled, the corresponding symbol will be dis-
played ( 1, 2 or 1 2).
9 Snooze function
1.
When the alarm sounds press the SNOOZE/LIGHT but-
ton to activate the snooze function. The alarm will
sound again in 5 minutes.
2.
Press ALARM button when the alarm sounds to inter-
rupt the alarm until the alarm time will be reached
again.
3.
The alarm will be turned off automatically if no button is
pressed within 2 minutes.
10 Receiving measurements
automatically
Once the power supply is enabled, the base station will dis-
play the measurement readings. Readings from the remote
sensor will be displayed within 3 minutes after powering it
on.
If no signal is received, go ahead with the following steps:
Press the 12/24/DOWN button for approx. 3 seconds to initi-
ate radio signal reception again.
Read the detailed manual for more information about read-
ings (see download information on page 2).
