Bresser Tendence 70-01100, Инструкция по эксплуатации

Страница: 33 / 132

GB/IE
33
(0°C), battery voltage levels will be dropped and this may reduce the
transmission range. For optimum performance, we recommend using
lithium batteries.
• Avoid using rechargeable batteries. (Rechargeable batteries cannot
maintain correct power requirements.)
• ALWAYS install batteries in the remote sensor before the main unit.
• Insert batteries before fi rst use, matching the polarity in the battery
compartment.
• During initial set up, place the remote sensor close to the main unit.
• After reception is established (remote readings will appear on the
main unit’s display), position the remote sensor and the main unit
within the effective transmission range of up to 100 feet (30 meters).
NOTE:
• Avoid pressing any buttons on the main unit before the remote read-
ings are displayed.
• Transmission or reception range may be affected by trees, metal
structures, and electronic appliances, surrounding building materials
and how the main unit and transmitter are positioned.
• Place the remote sensor so that it faces the main unit (receiver),
minimizing obstructions such as doors, walls and furniture.
• Though the remote sensors are weather-resistant, they should be
placed away from direct sunlight, rain or snow. The optimal location
for the remote sensor outdoors is under the eaves on the north side
of the building.
MOUNTING
• The remote sensor can be placed on the fl at surface or mounted on
the wall in vertical position.
• Use a screw, rather than a nail, for best mounting of the sensor.
• When mounting the main unit on the wall or vertical surface, fold the
table stand back into the unit.