38
4. OPERATION
Immediately after batteries are installed, the remote sensor will
start transmitting the temperature data to the main unit in regular
intervals.
Once the main unit is powered-up by activating the batteries, the
display will show all available LCD segments for a moment.
IMPORTANT:
After this, the unit will scan the remote sensors (Ch 1 to Ch 3) in
the
Temperature Window
. There is no immediate need to press any
button during this process. After this, the unit will start to scan
the DCF77 time transmitter in the
Clock Window
. Thereby, the
default time the unit has started with at the beginning is 12:00.
Here too, there is no immediate need to press any button during
this process.
Recommendation:
Allow the unit to receive the sensors and the time
without tou-
ching ANY button
for about 6-8 minutes during the main unit ini-
tial set up. This will give the unit time to synchronize with remotes,
stabilize pressure readings and settle with default settings.
