Bresser TemeoTrend P, Инструкция по эксплуатации

Страница: 28 / 104

28
Remote sensor
LED indicator (Fig. 2, 21)
Flashes when the remote sensor transmitting a signal.
channel switch (Fig. 2, 26)
Slide to position 1, 2 or 3.
RESET button (Fig. 2, 25)
In case of malfunction, press it by using a metal pin to
reset the remote sensor.
Wall-mount holder (Fig. 2, 22)
Use it to support the remote sensor on the wall with a
suitable hook.
SETTING AND DISPLAY
Automatically setting time and date.
Display of signal strength
The signal indicator displays signal strength in 4 levels.
When the symbol flashes the
time signal is being
received. The signal quality could be classified into 4
types:
No signal
Weak signal
Acceptable signal
Good signal
The time sync symbol will permanently light up after
the time signal has been received. Otherwise the symbol
will turn off.