Bresser Temeo TBT, Инструкция по эксплуатации

Страница: 7 / 12

and date are automatically synchronized with the time signal
transmitted from Europe. When used for the first time (after
inserting the batteries or pressing [ RESET ] button), the
clock will start to receive the RC signal in 5 minutes with the
signal strength indicator flashing.
SIGNAL STRENGTH INDICATOR
The signal indicator displays signal strength in 4 levels. Wave
segment flashing means time signals are being received.
The signal quality could be classified into four types:
Symbol
Signal
strength
no
signal
weak
signal
acceptable
signal
excellent
signal
NOTE!
1. Everyday the unit will automatically search for the time
signal at 2:00am , 8:00am, 2:00pm and 8:00pm.
2. Always place the unit away from interfering sources such
as TV set, computer, etc.
3. Avoid placing the unit on or next to metal plate.
4. Closed area such as airport, basement, tower block or
factory is not recommended.
5. Do not start reception on a moving article such as
vehicle or train.
MANUAL TIME SETTING
1. In normal time mode, press and hold [ TIME ] button for 2
seconds to enter the 12- or 24-hour mode setting.
2. Press [ + ] or [ – ] button to set the desired value.
3. Press [ TIME ] button again. Hours digit flashes. Press [ +
] or [ – ] button to change its value.