23 / 76
10 Manual time setting
1. Press and hold MODE button for approx. 3 seconds to change to time setting mode.
2. Digits to be set are flashing.
3. Press UP or DOWN button to change the value.
4. Press MODE button to confirm and continue to the next setting.
5. Settings order: Hours > Minutes > Year > Month > Day > Weekday language > Time zone (-12 to
12 hours)
6. Finally press the MODE button to save the settings and exit the setting mode.
7. To switch between 12 and 24 hours mode press MODE button in normal display mode.
11 Alarm setting
1. Press ALARM button to enter the alarm time setting mode.
2. Press ALARM button to activate or deactivate the alarm.
3. Press and hold ALARM button for approx. 3 seconds to enter the alarm time setting mode.
4. The value to be set flashes.
5. Press UP or DOWN button to change the value.
6. Press ALARM button to confirm and continue to the next setting.
7. Settings order: Hours > Minutes
8. Finally press the ALARM button to save the settings and exit the setting mode.
12 Snooze function
1. When the alarm sounds, press SNZ button to activate the snooze function. The alarm will sound
again in 5 minutes.
2. Press any other button when the alarm sounds to interrupt the alarm until the alarm time will be
reached again.
13 Receiving measurements automatically
Once the power supply is enabled, the base station will display the measurement readings. Readings
from the remote sensor will be displayed within 3 minutes after powering it on.
If no signal is received, go ahead with the following steps:
Press and hold the CH button for 3 seconds to re-initialize RC signal receiving.
Read the detailed manual for more information about readings (see download information on page 2).
14 Manual measurement display
1. Press UP button several times to display the saved values one after another.
2. Display order: Current values > MAX (highest values) > MIN (lowest values)
3. Press UP button for approx. 2 seconds during highest or lowest value display to irrevocable delete
all saved values.
NOTICE! Saved highest and lowest values will be deleted automatically every day on 0:00!