Bresser NightExplorer, Инструкция по эксплуатации

Страница: 5 / 8

5
EN
Tripod parts overview
B
Tripod adapter
C
Tripod connection thread

The locking knob of the centre column
E
Tripod plate
F
Base for plate mounting

Tripod leg
H
Ball adapter Locking knob
I
Locking knob for angle adjustment
J
Centre column
1)
Extension of the centre column
1
Tripod length lock
1
Rubber feet
NOTE!
Make sure that the quick clamping rings
and fixing screws are always hand-tight -
ened so that the necessary stability of the
tripod is guaranteed. Check the stability
before putting on a device.
Keep holding the photographic or optical
device until it is balanced and secured on
the tripod.
Never open the quick clamping rings and
fixing screws with an attached device to
prevent damage from falling.
TIPS on cleaning
Lenses (eyepieces and/or object lenses)
should be cleaned with a soft, lint-free
cloth (e.g. microfibre) only. Do not use
excessive pressure - this may scratch the
lens.
Dampen the cleaning cloth with a specta-
cle cleaning fluid and use it on very dirty
lenses.
Protect the device against dirt and dust.
Leave it to dry properly after use at room
temperature.
Then put the dust caps on and store the
device in the case provided.
DISPOSAL
Dispose of the packaging materials
properly, according to their type, such as
paper or cardboard. Contact your local
waste-disposal service or environmental
authority for information on the proper
disposal.
WARRANTY & SERVICE
The regular guarantee period is 5 years
and begins on the day of purchase. You
can consult the full guarantee terms at
www.bresser.de/warranty_terms.
In the event of a warranty claim, please
first contact the service team responsible
for your country, preferably by e-mail
or by using the contact form on the
website. In most cases, they will be able
to help you quickly. You will find the rele -
vant contact information under "Service"
in this manual.
IMPORTANT!
Do not send in equipment - even in the
event of damage - without first con -
sulting the Service Department. Unfor-
tunately, unsolicited units cannot be
accepted and processed.
SERVICE
Please contact the service centre first
for any questions regarding the prod-
uct or claims, preferably by e-mail.
E-Mail:
service@bresser.de
Telephone*: +49 28 72 80 74 210
BRESSER GmbH
Kundenservice
Gutenbergstr. 2
46414 Rhede
Deutschland
*Number charged at local rates (the amount you will be charged
per phone call will depend on the tariff of your phone provider);
calls from abroad will involve higher costs.