42
For cycling display:
To enable automatic rotating between different channel displays, press and hold
CHANNEL
until the
[
] icon is displayed. Each valid channel will now be alternately displayed for 5 seconds.
Setting units for temperature display (°C or °F)
In temperature and humidity mode, press and hold
SET
to convert units between degrees
Celsius (°C) and degrees Fahrenheit (°F).
Activating/deactivating the temperature alerts
1. In temperature and humidity mode, each press of
ALARM/CHART
rotates channel temperature
display between...
• Current temperature for corresponding channel
• Upper temperature alert (displays ‘OFF’ if deactivated): [
] icon displayed
• Lower temperature alert (displays ‘OFF’ if deactivated): [
] icon displayed
2. When the above alerts are displayed, pressing
[
▲
]
or
[
▼
]
will activate/deactivate the correspond-
ing alert.
Setting up the temperature alerts
1. In temperature and humidity mode, press
ALARM/CHART
to select alarm which you wish to con-
fi gure.
2. Press and hold
ALARM/CHART
until channel temperature and [
] or [
] icon starts fl ashing in
the display.
3. Set value for temperature alert:
Press
[
▲
]
or
[
▼
]
to adjust value. Press and hold either button for fast advance.
Press
ALARM/CHART
to confi rm your selection.
4. Upon completion the display will be returned to the temperature alert selection screen.
Disabling when temperature alarms are activated
Press
ALARM/CHART
to disable the alarm(s).
Viewing the max/min channel temperature and humidity
In temperature and humidity mode, each press of
MEMORY
rotates channel temperature and humid-
ity display between...
• Current temperature and humidity at outdoor sensor
• Minimum temperature and humidity at outdoor sensor
• Maximum temperature and humidity at outdoor sensor
Resetting the max/min channel temperature and humidity memory
In temperature and humidity mode, press and hold
MEMORY
to clear memory for all channels.
