Bresser MyTime Crystal P Colour, Инструкция по эксплуатации

Страница: 10 / 16

10 / 16
9. Press ALARM button during the alarm time display to disable the alarm. The symbol will not be
displayed.
12 Snooze function
1. When the alarm sounds, press SNOOZE button to activate the snooze function. The alarm will
sound again in 5 minutes.
2. Press ALARM button when the alarm sounds to interrupt the alarm until the alarm time will be
reached again.
3. The alarm will be turned off automatically if no button is pressed within 2 minutes.
13 Receiving measurements automatically
Once the power supply is enabled, the base station will display the measurement readings. Readings
from the remote sensor will be displayed within 3 minutes after powering it on.
Read the detailed manual for more information about readings (see download information on page 2).
14 Manual measurement display
1. Press MAX/MIN button several times to display the stored values one after another.
2. Display order: Current values > MAX (highest values) > MIN (lowest values)
3. When displaying highest or lowest values, press and hold MAX/MIN button for approx. 3 seconds
to delete all saved values.
15 3D weather trend display
The weather trend for the next 12 hours is calculated from the measured values. It is displayed in col-
our through the 3D symbols of the perspex pillar:
1 2 3
4
Illustration 3: Weather trend indicators
1 Sunny (red) 2 Partly cloudy (green)
3 Cloudy (white) 4 Rain (blue)
16 MAX/MIN Weather data
The main unit saves highest and lowest value records for indoor and outdoor temperature as well as
for humidity for 24 hours:
1. Press MAX/MIN button several times to display the stored values one after another.
2. Display order: Highest values > Lowest values > Current values
3. All values of the current recording period will automatically be deleted after 24 hours.