Bresser MeteoTemp WTM Colour, Быстрый старт

Страница: 30 / 108

30 / 108
11 Humidity value (outdoor) 12 Symbol outdoor area with
channel display
13 Remote sensor signal
strength 14 Symbol for channel rotation
15 Battery level indicator (Re-
mote sensor) 16 Humidity trend (outdoor)
(rising, steady or falling)
17 Symbol for highest (MAX) or
lowest (MIN) value (outdoor) 18 Moon phase
19 Air pressure (mb/hPa or
inHg) 20 Temperature value (outdoor)
21 Temperature trend (outdoor)
(rising, steady or falling) 22 Graphical weather forecast
display
23 Temperature trend (indoor)
(rising, steady or falling) 24 Symbol for highest (MAX) or
lowest (MIN) value (indoor)
7 Setting up power supply
Base device
1. Insert the DC connector into the connection socket of
the base station.
2. Insert the mains plug into the power outlet.
3. The device is energized directly.
4. Wait until the indoor temperature is displayed on the
base station.
NOTICE! For permanent operation, mains power
supply is recommended. Alternatively a power sup-
ply with batteries is also possible, to keep the time
setting in case of power failure. Proceed as follows:
5. Remove the battery compartment cover.
6. Insert the batteries into the battery compartment. En-
sure that the battery polarity (+/-) is correct.