Bresser Meteo Temp 7004200, Инструкция по эксплуатации

Страница: 30 / 36

30 / 36
6. Finally press the SET button to save the settings and
exit the setting mode.
11 Receiving measurements
automatically
Once batteries are installed, the base station will display the
measurement readings. Readings from the remote sensor
will be displayed within 3 minutes after powering it on.
If the clock fails to receive the time signal, will be dis-
played, then go ahead with the following steps:
1. Press and hold the DOWN button for approx. 2
seconds to re-initialize radio signal reception.
2. If the device is still not receiving the signal: First press
the SYNC button on the base station and then press
the SYNC button on the remote sensor.
12 Weather trend
The weather station will calculate a weather trend for the
next 12-24 hours on basis of the measured values.
1
2
3 4
5
1 Sunny 2 Partly cloudy
3 Cloudy 4 Rain
5 Snow