8 / 20
*depending on the object and the type of observation the object plate can be exchanged
9 Mounting the camera
This microscope is designed for use with a c-mount camera.
To mount an appropriate camera, proceed as follows:
1. Screw the camera onto the thread of the camera connection.
2. Loosen the fixing screw (optics) to individually rotate the camera including the microscope optics in
the microscope head.
10 Power supply
S3
S2
S1
S1 Connection socket for DC barrel con-
nector
S2 DC barrel connector
S3 Mains plug
1. Insert the DC barrel connector of the mains adapter into the DC connection socket of the device.
2. Insert the mains plug of the mains adapter into the socket.
The function light for the power supply is on. The device is ready for use.
11 Establishing the power supply (Battery
operation, optional)
1. Remove the battery compartment cover.
2. Insert the batteries into the battery compartment. Ensure that the battery polarity (+/-) is correct.
3. Replace the battery compartment cover.
12 Adjusting the lighting
The microscope offers three different lighting options (incident light, transmitted light and incident and
transmitted light together) and 5 brightness levels can be set for each one.
NOTICE! For incident light observations, use the black and white object plate provided. For
transmitted light observations, use the supplied transparent object plate.
1. Establish power supply for the microscope.
2. Set the desired lighting type by pressing the illumination buttons "Inc" (incident light) and/or
"Tra" (transmitted light).
