GB
INSTRUCTION MANUAL
BR-SP60
LED Fresnel Light
Art. No. F004354
GENERAL WARNINGS
DANGER OF BODILY INJURY!
Do not use in the presence of children or animals. Store out of reach
of children and animals.
RISK OF MATERIAL DAMAGE!
Make sure that no one can trip over connection cables of the device.
The device could be knocked over.
Only use the recommended power cable or the recommended
battery for the power supply!
The manufacturer accepts no liability for voltage damage caused by
the use of an unsuitable power supply!
DANGER OF AN ELECTRIC SHOCK!
This device contains electronic parts that are powered by a power
source (power adapter). Only use the device as described in the
manual. Otherwise, you run the DANGER of an ELECTRIC SHOCK.
Never bend, squeeze or pull power cables, connecting cables,
extensions or connectors. Protect cables from sharp edges and heat.
Check this device, cables and connections for damage before use.
Never attempt to operate a damaged device, or a device with
damaged electrical parts! Damaged parts must be replaced
immediately by an authorized service agent.
Operate the device only in a completely dry environment and do not
touch the device with wet or damp body parts.
RISK OF GLARE!
Make sure that people and animals do not look into the light. The
high luminosity can cause glare to the eyes and afterimages. This
impairment of vision can lead to accidents.
FIRE/EXPLOSION HAZARD!
Always place the device in such a way that it cannot tip over and
ensure that it is stored in a reasonably safe place.
• Keep children and animals away from the device! They could knock
the device over.
• Make sure that no one can trip over connection cables. The device
could be knocked over.
• Do not expose the device to high temperatures. Do not short-
circuit the device or dispose of in fire! Excessive heat and improper
handling can cause short circuits, fires and even explosions!
• Only use the recommended power supply*!
IMPORTANT NOTE!
Do not disassemble the device! In the event of a defect, please
contact your dealer. They will contact the Service Center and can
arrange the return of this device for repair if necessary.
Disconnect the power supply by pulling the mains plug when the
appliance is not in use, in case of a longer interruption of operation
and before any maintenance and cleaning work.
Place your device so that it can be disconnected from the power
supply at any time. The power outlet should always be near your
appliance and should be easily accessible, as the plug of the power
cord serves as a disconnect device from the mains supply.
To disconnect the unit from the mains, always pull the mains plug
and never pull the cable!
Do not subject the device to excessive vibrations.
PRODUCT INFORMATION
The 56mm (2.2”) Fresnel has an expansive spot-to-flood beam angle
range of 20 to 80 degrees at the spot setting. The fixture has a
daylight output 5600K and comes with a white and an orange filter
to change the color temperature. The CRI rating is typically 95+,
indicating an accurate rendition of color. The fixture is dimmable
from 10-100%. The brightness change can be made locally on the
fixture and viewed on the unit's LCD screen. It can also be made
remotely from a 2.4G wireless controller once they are paired with
the same channel from 01-99. You can also daisy-chain several lights
together and make brightness adjustments from a single controller
after pairing the remote controller with all the lights on the same
channel.
EC DECLARATION OF CONFORMITY
BRESSER has issued a „Declaration of Conformity“ in
accordance with applicable guidelines and corresponding
standards. The full text of the CE-declaration of conformity is
available at the following internet address:
www.bresser.de/download/F004354/CE/F004354_CE.pdf
UKCA DECLARATION OF CONFORMITY
Bresser UK Ltd. has issued a „Declaration of Conformity“ in
accordance with applicable guidelines and corresponding
standards. The full text of the UKCA declaration of conformity
is available at the following internet address:
www.bresser.de/download/F004354/UKCA/F004354_UKCA.pdf
Bresser UK Ltd. • Suite 3G, Eden House, Enterprise Way,
Edenbridge, Kent TN8 6HF, Great Britain
WARRANTY & SERVICE
The regular guarantee period is 2 years and begins on the day of
purchase. You can consult the full guarantee terms and details of
our services at www.bresser.de/warranty_terms.
www.bresser.de/warranty_terms
