10
The following settings are available:
1. Date and time
2. Default (reset to default settings)
3. Format (format memory card. Caution: all data stored on
the SD card will be lost).
4. Sensitivity (adjust the sensitivity of the motion sensor)
low / medium / high
5. Stamp (timestamp)
6. Photo Size (image resolution)
2 MP / 3 MP * / 5 MP * (* interpolated)
7. Delay (trigger time until the next photo)
30 min / 15 min / 10 min / 5 min / 3 min / 1 min / 30 sec /
15 sec / 10 sec / 5 sec
3.5 Viewing the pictures
There are 2 ways to view the pictures:
1. Via the LCD screen on the device
To view the images stored on the SD card directly on the
LCD screen of the device, press one of the preview buttons
for a few seconds. The camera now changes to „Preview
Mode“. Use the preview buttons to switch between the pic-
tures. The camera automatically exits „Preview Mode“ if no
key is pressed for a few seconds.
2. Via USB connection with a computer
In ON mode connect the camera with a computer using a
USB cable. The device will be shown as a fl ash drive and
you can easily start viewing images on the computer’s
screen.
3.6 Power off
Switch the On/Off lever to OFF position to power off the
camera. Please note that even in the OFF mode, the cam-
era still consumes certain power at μA level. Therefore,
please remove the battery if the camera will not be used
for a long time.
4. Troubleshooting
4.1 USB device is not recognized by the computer
This circumstance occasionally occurs in some OEM ver-
sions of Windows. It is not caused by a defect device. An
update of the USB drivers on the notebook or PC in most
cases solves the problem.
