Bresser 7007900000000, Быстрый старт

Страница: 28 / 32

28 / 32
9 Automatic time setting
After the power supply was established, the clock will auto-
matically search for the radio signal. The clock will automat-
ically search for the radio signal.
If the radio signal is received correctly, the date and time
will be set automatically and the radio control signal icon
turns on.
If the clock fails to receive the time signal, go ahead with the
following steps:
1. Press RCC button at the remote sensor for approx. 2
seconds to initialize the radio signal reception again.
2. If the device is still not receiving the signal, the time
must be set manually.
Read the detailed manual for more information about
manual time and alarm setting (see download information
on page 2).
10 Receiving measurements
automatically
Once the power supply is enabled, the base station will dis-
play the indoor temperature readings. Readings from the re-
mote sensor will be displayed within 3 minutes after power-
ing it on.
Read the detailed manual for more information about read-
ings (see download information on page 2).