Bresser 7007330, Инструкция по эксплуатации

Страница: 10 / 32

10 / 32
8 Setting the weather status
NOTICE! For a correct display of the weather forecast,
the current weather status must be set correctly imme-
diately after powering on the device. The first weather
forecast will be displayed approximately 6 to 8 hours
after the set-up.
NOTICE! These settings should also be made again when
changing the location of the device.
1. After switching on the unit, press the WEATHER button
for 3 seconds. The weather symbol on the display
flashes.
2. Select the graphic symbol corresponding with the cur-
rent weather status by pressing the UP/ALARM or
DOWN/°C/°F button.
3. Finally, press the WEATHER button to save the set-
tings and return to the normal display mode.
9 Automatic time setting
After powering on, the device automatically searches for the
radio signal. It takes about 3-8 minutes to complete this pro-
cess.
If the radio signal is received correctly, the date and time
are set automatically and the reception symbol is displayed.
If no radio signal is received, proceed as follows:
1. Press the DOWN/°C/°F and UP/ALARM button for ap-
prox. 2 seconds to initiate radio signal reception again.
2. If still no radio signal is received, the time must be set
manually.