Bresser 7002586, Инструкция по эксплуатации

Страница: 15 / 32

15 / 32
21 Manual time adjustment
If the station is still in AP mode (AP flashes), first deactivate the reception of the time signal by press-
ing the SENSOR / WIFI button for about 8 seconds. When AP stops flashing, you can now set the
time and date manually.
1. Press the CLOCK-SET button for approx. 3 seconds to enter the time setting mode.
2. Digits to be set are flashing.
3. Press UP or DOWN button to change the value.
4. Press the CLOCK-SET button to confirm the entry and move to the next setting.
5. Settings sequence: Sequence of the settings: Daylight saving time (DST) on/off > Hours > Minutes
> 12/24 hour mode > Year > Month > Day > Month-Day/Day-Month > Time synchronization on/off
> Language
NOTICE! When setting the time manually, time synchronization must be deactivated.
6. Finally, press the CLOCK-SET button to save the settings and exit the setting mode.
NOTICE! In normal display mode, press the CLOCK SET button to switch between year and date
display. In setting mode, press the CLOCK SET button for about 2 seconds to return to normal
display mode.
22 Wake-up call setting
Switching the alarm clock (and frost warning) on/off
1. Press the ALARM button to display the alarm time.
2. Press the ALARM button again to enable the alarm.
3. Press the ALARM button once more to activate the frost warning alarm time.
4. To deactivate the alarm and frost warning, press the ALARM button until the alarm icons are no
longer displayed.
Setting the alarm time
5. Press the ALARM button for approx. 2 seconds to enter the alarm time settings mode.
6. Digits to be set are flashing.
7. Press UP or DOWN button to change the value.
8. Press the ALARM button to confirm the entry and move to the next setting.
9. Sequence of settings: Hours > minutes
10. Finally, press the ALARM button to save the settings and exit the settings mode.
11. Press the SET key to activate the wake-up call. The symbol will displayed on the LCD. The
alarm is enabled.
12. Press the SET key again to deactivate wake-up call. The symbol is no longer displayed. The
alarm is disabled.
23 Snooze function
1. When the alarm sounds, press the SNZ/LIGHT button to activate the snooze function. Wake-up
call sounds again after 4 minutes.
2. When the alarm sounds, press any other key to stop the alarm until the set alarm time is reached
again.
3. If no key is pressed, the alarm is automatically switched off after 2 minutes.