Bresser 7001800CM3000, Инструкция по эксплуатации, Страница: 9 / 24

9
GB
DOWN, are disabled. In this case press and hold
the DOWN button (17) for approx. 5 seconds until
the
LED
km/h
symbol disappears. Automatic signal re-
ception is now disabled.
1. Press and hold the SET button (12) in normal
time display mode for approx. 3 seconds to
change to time setting mode. Year figure flashes.
2. Press the UP (16) or DOWN button (17) to
change the value.
3. Press the SET button (12) again to switch to
the next setting.
4. Repeat steps 2 and 3 to set other values in
the following sequence: Month > Day > 12/24
hour mode > time zone (+/- 12 hours) > Hours
> Minutes
5. After setting the value for the minutes press
SET button (12) again to save and exit time
setting.
Alarm time setting
1. Press SET button (12) once switch to alarm
time display. The currently selected alarm time
will be displayed with AL.
2. In alarm time display mode press and hold SET
button (12) for approx. 3 seconds to switch to
alarm time setting mode. Hour figure flashes.
2. Press the UP (16) or DOWN button (17) to
change the value.
3. Press the SET button (12) again to switch to
the next setting.
4. Repeat steps 2 and 3 to set other values in the
following sequence: Minutes > Snooze interval
(1 to 20 minutes)
5. After setting the value for the snooze interval
press SET button (12) again to save and exit
alarm time setting.
6. Press the UP button in alarm time display mode
enable or disable the alarm. Once the alarm has
been activated, the symbol will be displayed.
NOTE!
Press the SNOOZE button when the alarm sounds
to interrupt the alarm for the desired snooze in-
terval. Press any button, except SNOOZE, to stop
the alarm.