Bresser 7000025000000, Инструкция по эксплуатации

Страница: 10 / 36

10 / 36
Note that the actual range depends on the respective con-
struction materials used for the buildings as well as the re-
spective position of the base unit and the outdoor sensor.
External influences (various radio transmitters and other
sources of interference) can greatly reduce the possible
range. In such cases, we recommend finding other locations
for both the base unit and the outdoor sensor. Sometimes
moving the sensor by just a few centimeters is enough!
7 Setting up power supply
Base unit
1. Remove the battery compartment cover.
2. Insert the batteries into the battery compartment.
Make sure that the battery terminals are correctly
aligned (+/-).
3. Replace the battery compartment cover.
4. Wait until indoor temperature is displayed on the base
unit.
Wireless sensor
5. Remove the screws on the battery compartment cover
with a suitable Phillips screwdriver and remove the bat-
tery compartment cover.
6. Move the channel slider to the desired channel.
NOTICE! This Thermo-Hygrometer can be operated
with up to 3 wireless sensors. Each connected wireless
sensor must be operated on a different channel. If only
one wireless sensor is connected, it should be operated
on channel 1.
7. Insert the batteries into the battery compartment.
Make sure that the battery terminals are correctly
aligned (+/-).
8. Replace and screw on the battery compartment cover.